How to install the android navigation GPS screen to Mercedes Benz E class 2016 NTG 5.0? Please read the installation instruction below, it will show you step by step guidance and you can install it on your own, that is plug and play.
Instruction Steps
I.Original Monitor(Please power off before installation) 2.Pry the buckles on the left side of the air conditioning vent
3.Pry the buckles on the right side of the air conditioning vent 4.Open the glove box and pull down the buckle
5. Pry the buckles,and remove the air conditioning panel 6. Pry out the decorative frame from the original monitor.
7. Remove the fixing screws from original monitor 8. Remove the left and right fixing screws of the original HOST
9. Remove the power harness from original host,and connect it to android harness. 10. Connect original LVDS cable with Android LVDS cable
11. Assemble well the stand on original dashboard and put cables well 12.Plug Audio-USB into USB port of the armrest box
13. Assemble Android monitor to the stand, pry out the screw cover and lock the screws. 14. Effect picture after installation
Installation wire diagram
If above installation process can not show all details of installation, you can take a look the wire-diagram as below, and you can click here to view detailed instruction for the installation wire diagram.
